VNV35N07
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 28mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Voltage - Rated DC | 70V |
| Max Power Dissipation | 125W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Current Rating | 35A |
| Base Part Number | VNV35 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 35A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 125W |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Continuous Drain Current (ID) | 35A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| Turn On Time | 0.8 µs |
| Output Peak Current Limit-Nom | 35A |
| Rds On (Typ) | 28m Ω (Max) |
| Drain to Source Resistance | 28mOhm |
| Built-in Protections | OVER CURRENT; THERMAL; ZENER CLAMP |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNV35N07 Overview
It is packaged in the manner of a Tube.It is included in the package PowerSO-10 Exposed Bottom Pad.A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.As a default, the output is set to 1.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.The VNV35 family consists of this type.It has a total of 10 terminations.In order to operate, 10 pins are used.Currently, the lighting driver has a total of 1 functions.As a result, the maximum output current is reduced to 35A in order to meet the operation requirements.The lighting driver is mounted in the way of Surface Mount.A total of 10 pins are present on it.The LED driver has 28mOhm resistance.These electrical components are part of the OMNIFET?, VIPower? series.When this case is used, the output current is set to 25A.Optimal efficiency requires a voltage of 18V.A maximum current requirement of 250μA is required for its operation.
VNV35N07 Features
Resistance of 28mOhm
VNV35N07 Applications
There are a lot of STMicroelectronics VNV35N07 Power Switches ICs applications.
- Set-Top Boxes
- HDD, SSD
- Telecom and Network Systems
- Gaming
- Various applications equipped with buttons
- PDAs
- PC Cards
- Hot Swaps
- Notebook and Tablet Computers
- Wearable Devices
