VNV35N0713TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 28mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 125W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | VNV35 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 35A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 125W |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 0.8 μs |
| Output Peak Current Limit-Nom | 35A |
| Rds On (Typ) | 28m Ω (Max) |
| Built-in Protections | OVER CURRENT; THERMAL; ZENER CLAMP |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNV35N0713TR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).This file is included in package PowerSO-10 Exposed Bottom Pad.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the type of switch owned by it.It is possible to use 1 outputs in the lighting driver.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The VNV35 family contains this object.In total, there are 10 terminations.In order to operate, 10 pins are used.Currently, there are 1 functions associated with the lighting driver.The maximum output current drops to 35A in order to meet the operation criteria.The lighting driver is mounted in the way of Surface Mount.In total, it has 10 pins.It has 28mOhm resistance.It belongs to the OMNIFET?, VIPower? series.As a result, the output current is set to 25A.The supply voltage should be set at 18V for best efficiency.It operates at a maximum current of 250μA.
VNV35N0713TR Features
Resistance of 28mOhm
VNV35N0713TR Applications
There are a lot of STMicroelectronics VNV35N0713TR Power Switches ICs applications.
- USB3.1 Power Delivery
- Wearable Devices
- Wireless Headsets
- Smartphone and PDA
- Set-Top Boxes
- Wireless/Networking Cards
- Solid-State Drives
- USB Power Distribution
- Storage (HDDs, SSDs)
- Notebook and Tablet Computers
