VNV35NV0413TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 10mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 125W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | VNV35 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 45A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 125W |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 12 μs |
| Switch Type | General Purpose |
| Drain to Source Voltage (Vdss) | 40V |
| Turn-Off Delay Time | 120 μs |
| Continuous Drain Current (ID) | 30A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Output Peak Current Limit-Nom | 45A |
| Rds On (Typ) | 10m Ω (Max) |
| Drain to Source Resistance | 10Ohm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNV35NV0413TR Overview
The LED driver's packaged as a Tape & Reel (TR).There is a package for it in the PowerSO-10 Exposed Bottom Pad package.A Surface Mount mounting is used for the LED driving board.The switch type is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 1 outputs in the lighting driver.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts.The VNV35 family contains this object.It contains 10 terminations.The 10 pins are used for the operation of the system.There are 1 functions of the LED driver.In order to meet the operation criteria, the maximum output current drops to 45A.The LED driving board is mounted in the way of Surface Mount.10 pins are connected to it in total.The LED driver has 10mOhm resistance.This electrical component is included in the OMNIFET II?, VIPower? series.This case results in a 30A output current.When using this LED driving board, it is recommended that the supply voltage is set to 18V.100μA is the maximum current required to operate it.
VNV35NV0413TR Features
Resistance of 10mOhm
VNV35NV0413TR Applications
There are a lot of STMicroelectronics VNV35NV0413TR Power Switches ICs applications.
- Set-top-box
- PC Cards
- Wireless Headsets
- Smart Phones, Feature Phones
- Portable Video Game Players
- Wireless Modem Data Cards
- Portable Devices
- Portable Music Players
- Smartphone and PDA
- Portable GPS
