VNV49N0413TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 40mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 125W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNV49 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 49A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 125W |
| Output Current | 28A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 33V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 3.8 µs |
| Output Peak Current Limit-Nom | 49A |
| Rds On (Typ) | 40m Ω (Max) |
| Turn Off Time | 24 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
VNV49N0413TR Overview
The package is in the form of a Tape & Reel (TR).There is a package for it in the PowerSO-10 Exposed Bottom Pad package.The lighting driver has the mounting type Surface Mount.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.As a default, the output is set to 1.Operation is based on Not Required supply voltage.The maximum output voltage of this LED driver is N-Channel volts.I believe it belongs to the VNV49 family.It contains 10 terminations.In order to operate, the 12 pins are used.As far as functions are concerned, the lighting driver has 1.The maximum output current must drop to 49A to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.There are 10 pins in total on this board.Lighting drivers with 40mOhm resistance are used.It is part of the OMNIFET?, VIPower? series.The output current is set to 28A in this case.The supply voltage should be set at 18V for best efficiency.For its operation, a maximum current requirement of 250μA is required.
VNV49N0413TR Features
Resistance of 40mOhm
VNV49N0413TR Applications
There are a lot of STMicroelectronics VNV49N0413TR Power Switches ICs applications.
- Portable Video Game Players
- USB Ports/Hubs
- PC Card Hot Swap
- Storage Drives
- Hot Swap
- Hard Disk Drives
- Mobile Communication Devices
- Solid-State Drives
- Portable GPS Device
- Wireless Headsets
