VS3AN5XLP
| Parameters | |
|---|---|
| Mount | Brackets |
| Number of Pins | 3 |
| Body Material | ABS |
| Operating Temperature | -20°C~55°C |
| Published | 2002 |
| Series | VS3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Cable |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IEC IP67 |
| Approval Agency | CE |
| Output Configuration | NPN - Light-ON |
| Cable Length | 78.74 2m |
| Output Current | 50mA |
| Contact Current Rating | 50mA |
| Response Time | 1ms |
| Sensing Distance | 9.843 (250mm) |
| Sensing Method | Retroreflective, Polarized |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Cable with Connector |
| Light Source | LED |
| Min Supply Voltage (DC) | 10V |
| Length | 25.4mm |
| Width | 8.89mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
VS3AN5XLP Overview
Photoelectric sensors should be set at -20°C~55°C for reliable performance. Electronic components require a voltage of 10V~30V to function in a circuit or system. The ideal response time for a photoelectric sensor is 1ms. The photoelectric sensor must be connected to the 3 pins in order to function properly. Whenever a photoelectric sensor is operating, the output current should be zero. There is no damage to the photoelectric sensor if the maximum voltage of 30V is applied to the DC circuit. It can work at 0V, which is the lowest voltage possible for this type of sensor.
VS3AN5XLP Features
Sensing Distance: 9.843 (250mm)
3 pins
Response Time: 1ms
Operating Temperature: -20°C~55°C
VS3 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
VS3AN5XLP Applications
There are a lot of Banner Engineering Corporation VS3AN5XLP Photoelectric Sensors applications.
- Counting small objects
- Pharmaceutical industry
- Detecting colours
- Zone scanners
- Passive infrared sensors
- Automotive industry
- Mechanical engineering
- Checking objects on production lines or conveyors
- Luminescence sensors
- Measuring distance
