banner_page

W48C111-16H

2.5V Fanout Buffer (Distribution), Spread Spectrum Clock Generator 100MHz Clock Generators 28-SSOP (0.209, 5.30mm Width) 28 Terminals Surface Mount 2.375V~3.465V Tube


  • Manufacturer: Cypress Semiconductor Corp
  • Nocochips NO: 217-W48C111-16H
  • Package: 28-SSOP (0.209, 5.30mm Width)
  • Datasheet: PDF
  • Stock: 640
  • Description: 2.5V Fanout Buffer (Distribution), Spread Spectrum Clock Generator 100MHz Clock Generators 28-SSOP (0.209, 5.30mm Width) 28 Terminals Surface Mount 2.375V~3.465V Tube (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-SSOP (0.209, 5.30mm Width)
Operating Temperature 0°C~70°C
Packaging Tube
Published 1999
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 28
ECCN Code EAR99
Type Fanout Buffer (Distribution), Spread Spectrum Clock Generator
Terminal Finish Tin/Lead (Sn/Pb)
Additional Feature REQUIRES ADDITIONAL 3.3V SUPPLY
Technology CMOS
Voltage - Supply 2.375V~3.465V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 220
Supply Voltage 2.5V
Terminal Pitch 0.65mm
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Output Clock
JESD-30 Code R-PDSO-G28
Number of Outputs 10
Qualification Status Not Qualified
Power Supplies 2.5/3.33.3V
Number of Circuits 1
Supply Current-Max 80mA
Frequency (Max) 100MHz
Input Clock, Crystal
Ratio - Input:Output 1:10
Primary Clock/Crystal Frequency-Nom 14.318MHz
PLL Yes
Differential - Input:Output No/No
Divider/Multiplier Yes/No
Height Seated (Max) 2mm
Width 5.3mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

W48C111-16H Overview


As a clock IC, it is packaged by the Tube method. As part of the 28-SSOP (0.209, 5.30mm Width) package, this clock generator is embedded. This clock generator ic can sustain 220 degrees of temperature during reflowing. As a result of this, we can find 28 terminations. This time clock generator should be voltaged at 2.5V. In this clock generator, Clock, Crystal is used as the input to the clock. There are 1 circuits implemented in order to achieve full performance from this electronic part. An up to 100MHz frequency is provided by this clock-based RF synthesizer. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. As long as there are 2.375V~3.465V supply voltages provided, clock generator ic should work. The temperature should be set at 0°C~70°C to ensure reliable performance. A frequency synthesizer which is compatible with the Clock logic levels is presented here. This electronic component can be classified into Fanout Buffer (Distribution), Spread Spectrum Clock Generator. With REQUIRES ADDITIONAL 3.3V SUPPLY, this clock generator produces better clock signals. The output frequency can be amplified as high as possible with its 10 signal outputs. Elemental destruction can occur when the supply current is exceeded (higher than 80mA)

W48C111-16H Features


Available in the 28-SSOP (0.209, 5.30mm Width)
Supply voltage of 2.5V

W48C111-16H Applications


There are a lot of Cypress Semiconductor Corp W48C111-16H Clock Generators applications.

  • HDD recorders
  • Melting
  • Satellite navigation communication
  • Multi-function printers
  • Signal generator
  • Tracking filters
  • Microwave point-to-point systems
  • High-speed optical transport network (OTN)
  • Closed circuit systems
  • Media broadcast servers

Write a review

Note: HTML is not translated!
    Bad           Good