WM8581AGEFT/V
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 48 |
| Weight | 9.071791g |
| Number of Terminations | 48 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Temperature Grade | INDUSTRIAL |
| Interface | 2-Wire, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.97V |
| Operating Supply Current | 30mA |
| Nominal Supply Current | 30mA |
| Operating Mode | SYNCHRONOUS |
| Resolution | 3 B |
| Number of A/D Converters | 1 |
| Telecom IC Type | PCM CODEC |
| Signal to Noise Ratio (SNR) | 100 dB |
| Number of D/A Converters | 4 |
| Filter | YES |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | RoHS Compliant |
WM8581AGEFT/V Overview
Space-saving reasons have led to it being packaged in a TQFP package. In order to prevent signal reflections from off the end of the transmission line, 48 terminations are used. Essentially, it is an electronic device with 48 pins. Using Surface Mount technology, it is mounted to a PCB. 5.5V is the maximum value of supply voltage. Analog signals are converted into digital signals by A/D converters. It is recommended that the supply voltage is maintained at 2.97V. The supply voltage is set to 3.3V. For the conversion of digital signals into analog ones, 4 D/A converters are used. It is set to the maximum value of 85°C so normal use can be maintained. For normal operation, the operating temperature must be set at -40°C at least. There is normally a current of 30mA flowing through the circuit at any given time. The supply voltage is 30mA.
WM8581AGEFT/V Features
Embedded in the TQFP package
1 A/D converters
Operating supply current of 30mA
WM8581AGEFT/V Applications
There are a lot of Cirrus Logic WM8581AGEFT/V CODECs Interface ICs applications.
- Electronic circuits
- Robotic arms
- Magnetic positional control
- Material handling
- Full adders
- Code conversion
- Data distribution
- Multi-axis control
- Subtraction
- Timber products
