WM8731SEDS/V
| Parameters | |
|---|---|
| Output Power | 18mW |
| Bandwidth | 20 Hz |
| Data Interface | Serial |
| Sampling Rate | 96 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.42V~3.6V |
| Number of A/D Converters | 2 |
| Signal to Noise Ratio (SNR) | 90 dB |
| Number of D/A Converters | 2 |
| Resolution (Bits) | 24 b |
| Number of Analog Inputs | 3 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 90 / 95 |
| S/N Ratio, ADCs / DACs (db) Typ | 90 / 100 |
| Number of Analog Outputs | 6 |
| Height | 2mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Supplier Device Package | 28-SSOP |
| Weight | 2.26799g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | Audio |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Operating Supply Voltage | 3.6V |
| Number of Channels | 2 |
| Interface | 2-Wire, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
WM8731SEDS/V Overview
It is supplied in the 28-SSOP (0.209, 5.30mm Width) package for the purpose of space saving. It is adopted to package in the Tube way. Due to the fact that this part is of the type Audio, it is capable of delivering high-efficiency performance in a wide range of applications. The mounting type is Surface Mount. Using -40°C~85°C as the operating performance allows it to operate normally. 2 / 2 ADC / DAC is integrated into it. 2.7V~3.6V of supply voltage are applied to the analog circuit. The digital circuit is provided with the supply voltage of 1.42V~3.6V. It is a kind of 28-pin electronic device. This device is mounted on a PCB which uses the Surface Mount technology. In order for the supply voltage to be maintained at 3.6V, it should be set to its maximum value. It is possible to convert analog signals into digital signals using 2 A/D converters. It is recommended to maintain a voltage of 2.7V as the minimum value. The device is able to operate at 3.6V voltages. For converting digital signals into analog signals, there are 2 D/A converters. 85°C is set as the maximum operating temperature to keep the system working normally. In order to keep normal operation, the operating temperature is set as a minimum value of -40°C. Data transmission is achieved through 2 channels. It is equipped with 3 analog inputs. A total of 6 analog outputs are available on the device.
WM8731SEDS/V Features
Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
2 A/D converters
3 analog inputs
6 analog outputs
WM8731SEDS/V Applications
There are a lot of Cirrus Logic Inc. WM8731SEDS/V CODECs Interface ICs applications.
- X-Y positioning
- Digital systems
- Material handling
- Automatic health monitoring systems
- CNC machining
- Code conversion
- Electronics industry
- Filling
- Robotic arms
- Advanced breast cancer treatments
