X4043M8Z-2.7A
| Parameters | |
|---|---|
| Package / Case | MSOP |
| Number of Pins | 8 |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.92V; SELECTABLE WATCHDOG TIMER, POWER ON RESET |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 3mA |
| Max Supply Current | 3mA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.92V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100 ms |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Reset Delay Time | 400 ms |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
X4043M8Z-2.7A Overview
This power management consists of 8 mounting terminals on which it can be mounted. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. Please refer to power management for MSOP functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. 8 pins are present on the power management system. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2.7V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The supply current of the power management is 3mA. Among other features, IC power can be also taken advantage of [0], for instance. A maximum supply temperature of 3mA can be used with this power management.
X4043M8Z-2.7A Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current
X4043M8Z-2.7A Applications
There are a lot of Intersil (Renesas Electronics America) X4043M8Z-2.7A Voltage Supervisors applications.
- Radar
- Detection of phase sequence
- Transformer load monitoring equipment
- Battery-powered equipment
- Cloud computing
- Display equipment
- Electronics installed in the vehicle
- Medical-specific insulation monitor
- WiFi router
- Satellite navigation
