X5045PZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 8 |
| Packaging | Bulk |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 3.3MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Qualification Status | Not Qualified |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 500B |
| Operating Supply Current | 3mA |
| Max Supply Current | 3mA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High |
| Voltage - Threshold | 4.38V |
| Reset Timeout | 100 ms |
| Min Reset Threshold Voltage | 4.25V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 400 ms |
| Height Seated (Max) | 4.32mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
X5045PZ Overview
This power management consists of 8 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Bulk. In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please find attached PDIP functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. During the reflow process, a peak temperature of NOT APPLICABLE is specified for the package. The supervisor is always powered by a 5V volt supply. The mount is provided by Through Hole. Power managment ic pin count is 8. IC management can only work with a supply voltage of 4.5V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. As far as the supply current of the power management is concerned, it is 3mA. The maximum supply temperature is 3mA. On the supervisor, a total of 1 inputs are monitored as IC management of its monitoring system. As a rule of thumb, voltage supervisor will work well in most cases with a frequency of 3.3MHz. In this IC power, there is a memory zone of 500B.
X5045PZ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
3mA operating supply current
X5045PZ Applications
There are a lot of Intersil (Renesas Electronics America) X5045PZ Voltage Supervisors applications.
- Household appliances
- Urban rail transit weak current power monitoring
- Power distribution systems of ICU
- Medical-specific insulation monitor
- Transformer load monitoring equipment
- Power communication system
- Power distribution systems of infant care room
- Sensitive sensors
- Microprocessor system
- Important electronics for automotive protection
