XA2C128-8VQG100Q
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2003 |
| Series | CoolRunner II |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XA2C128 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Number of I/O | 80 |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 8 |
| Number of Gates | 3000 |
| Max Frequency | 152MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 7ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | ROHS3 Compliant |
XA2C128-8VQG100Q Overview
A mobile phone network consists of 128macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).A 100-TQFP package contains the item.It is programmed with 80 I/Os.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part is wired with a terminal position of QUAD.It is powered from a supply voltage of 1.8V.There is a part included in Programmable Logic Devices.Trayshould be used to package the chip.The device operates at a temperature of -40°C~105°C TAin order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.As part of the CoolRunner IIseries, it is a type of FPGA.The chip is programmed with 100 pins.It is also possible to find YESwhen using this device.The XA2C128indicates that related parts can be found.In digital circuits, there are 3000gates, which act as a basic building block.If high efficiency is to be achieved, the supply voltage should be maintained at [0].In this case, Surface Mountis used to mount the electronic component.The device has a pinout of [0].It operates at a maximum supply voltage of 1.9V volts.A minimum supply voltage of 1.7V is required for it to operate.There should be a lower maximum frequency than 152MHz.Fundamental building blocks consist of 8logic elements/cells.
XA2C128-8VQG100Q Features
100-TQFP package
80 I/Os
The operating temperature of -40°C~105°C TA
100 pin count
100 pins
XA2C128-8VQG100Q Applications
There are a lot of Xilinx Inc. XA2C128-8VQG100Q CPLDs applications.
- INTERRUPT SYSTEM
- Custom shift registers
- Digital systems
- PULSE WIDTH MODULATION (PWM)
- Programmable power management
- Preset swapping
- D/T registers and latches
- Digital multiplexers
- Multiple DIP Switch Replacement
- TIMERS/COUNTERS
