XA2C384-11TQG144Q
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2001 |
| Series | CoolRunner II |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XA2C384 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Number of I/O | 118 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 24 |
| Number of Gates | 9000 |
| Max Frequency | 118MHz |
| Screening Level | AEC-Q100 |
| Speed Grade | 11 |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 9.2ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | ROHS3 Compliant |
XA2C384-11TQG144Q Overview
There are 384 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The product is contained in a 144-LQFP package.There are 118 I/Os on the board.144terminations have been programmed into the device.The terminal position of this electrical component is QUAD.The power source is powered by 1.8Vvolts.This part is included in Programmable Logic Devices.Trayshould be used for packaging the chip.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].There should be a Surface Mounton the chip.It is a type of FPGA belonging to the CoolRunner II series.Chips are programmed with 144 pins.It is also possible to find YESwhen using this device.The XA2C384indicates that its related parts can be found.In digital circuits, 9000gates serve as building blocks.If high efficiency is to be achieved, the supply voltage should be maintained at [0].In this case, it is mounted by Surface Mount.There are 144 pins embedded in the device.This device operates at a voltage of 1.9V when the maximum supply voltage is applied.Initially, it requires a voltage of 1.7Vas the minimum supply voltage.It is recommended that the maximal frequency be lower than 118MHz.Basic building blocks have 24logic elements.
XA2C384-11TQG144Q Features
144-LQFP package
118 I/Os
The operating temperature of -40°C~105°C TA
144 pin count
144 pins
XA2C384-11TQG144Q Applications
There are a lot of Xilinx Inc. XA2C384-11TQG144Q CPLDs applications.
- Custom shift registers
- POWER-SAVING MODES
- Timing control
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Protection relays
- High speed graphics processing
- DDC INTERFACE
- I/O PORTS (MCU MODULE)
- Software-driven hardware configuration
- Reset swapping
