XAM3894BCYG120
| Parameters | |
|---|---|
| Additional Interfaces | I2C, McASP, McBSP, SPI, SD/SDIO, UART |
| Co-Processors/DSP | Multimedia; NEON™ SIMD |
| Display & Interface Controllers | HDMI, HDVPSS |
| SATA | SATA 3Gbps (1) |
| Height Seated (Max) | 3.31mm |
| Length | 25mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | 1031-BFBGA, FCBGA |
| Number of Pins | 1031 |
| Operating Temperature | 0°C~95°C TJ |
| Packaging | Tray |
| Series | Sitara™ |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| ECCN Code | 3A991.A.2 |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1V |
| Terminal Pitch | 0.65mm |
| Frequency | 1.2GHz |
| Base Part Number | AM3894 |
| Voltage | 1.05V |
| Max Supply Voltage | 1.05V |
| Min Supply Voltage | 950mV |
| Speed | 1200 MHz |
| RAM Size | 64kB |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A8 |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Address Bus Width | 16 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Ethernet | 10/100/1000Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | DDR2, DDR3 |
| USB | USB 2.0 + PHY (2) |
XAM3894BCYG120 Overview
XAM3894BCYG120 OverviewThe embedded microprocessor has been packed in 1031-BFBGA, FCBGA for convenient overseas shipping.High reliability can be achieved by using the advanced packaging method Tray.In the CPU, there are 1 Core 32-Bit cores and 1 Core 32-Bit bus width.It is important to understand the operating temperature around 0°C~95°C TJ.This is part of the Sitara? series.Core-wise, this CPU has a ARM? Cortex?-A8 processor.It has DDR2, DDR3 RAM controllers.To serve better this microprocessor features I2C, McASP, McBSP, SPI, SD/SDIO, UART interfaces.As far as I/O is concerned, this CPU runs at 1.8V 3.3V.I would rate this as a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type.Use AM3894 when searching for variants of the embedded microprocessor.The microprocessor should be turned on and run with a voltage supply of 1V volts.A 32-Bit architecture is used.There is 1.2GHz frequency set for the CPU.To learn about the functions of the pins 1031 please refer to their datasheets.Data can be transferred over 32b bandwidths.In many applications, this CPU is mounted with a Surface Mount bus.A CPU core voltage of 1.05V is present.It is designed with 0 RAM (Random-Access Memory).The embedded microprocessor should not be supplied with a voltage higher than 1.05V.The lowest voltage that should be applied to the micro processor is 950mV.
XAM3894BCYG120 Features
XAM3894BCYG120 Features
ARM? Cortex?-A8 Core
32-Bit Structure
32b-Bit Data Bus Width
64kB RAM
XAM3894BCYG120 Applications
XAM3894BCYG120 ApplicationsThere are a lot of Texas Instruments XAM3894BCYG120 Microprocessors applications.
Smart instruments
Glucose monitoring systems (for Type 1 Diabetes)
Agriculture, transportation field
Leakage current tester
Torpedo guidance
Calculators
Magnetic resonance imaging (MRI)
Safety -airbags, automatic braking system (ABS)
Blood pressure monitors
Mice
