XAM3894CYG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 1031-BFBGA, FCBGA |
| Number of Pins | 1031 |
| Operating Temperature | 0°C~95°C TJ |
| Packaging | Tray |
| Series | Sitara™ |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | 3A991.A.2 |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1V |
| Terminal Pitch | 0.65mm |
| Frequency | 1GHz |
| Base Part Number | AM3894 |
| Voltage | 1.05V |
| Interface | SPI |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 1.5V |
| Memory Size | 64kB |
| Number of I/O | 64 |
| Speed | 1500 MHz |
| RAM Size | 32kB |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Number of Bits | 32 |
| Core Processor | ARM® Cortex®-A8 |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 7 |
| Address Bus Width | 16 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Ethernet | 10/100/1000Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | DDR2, DDR3 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | I2C, McASP, McBSP, SPI, SD/SDIO, UART |
| Co-Processors/DSP | Multimedia; NEON™ SIMD |
| Display & Interface Controllers | HDMI, HDVPSS |
| SATA | SATA 3Gbps (1) |
| Height Seated (Max) | 3.31mm |
| Length | 25mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
XAM3894CYG Overview
XAM3894CYG Microprocessor features the highest performance and offer a broad selection of upgraded connectivity and inputs. XAM3894CYG MCU is an excellent option for a variety of smaller and medium-sized tasks and full platform solutions. It is suitable for Motor drive, Medical equipment, Industrial applications, Printers, and scanners, Alarm systems, and Home audio appliances.
XAM3894CYG OverviewDue to its 1031-BFBGA, FCBGA packaging, it is convenient to ship overseas.Using advanced packaging techniques Tray, high reliability is ensured.Cores/Bus width is 1 Core 32-Bit.Extended operating temperature around 0°C~95°C TJ.In the series Sitara?, it is found.This CPU is cored with a ARM? Cortex?-A8 processor.There are DDR2, DDR3 RAM controllers used by this CPU.A I2C, McASP, McBSP, SPI, SD/SDIO, UART interface has been added to this microprocessor in order to serve the user better.I/O is run at 1.8V 3.3V on this CPU.uPs/uCs/Peripheral ICs type is MICROPROCESSOR, RISC.Search AM3894 for variants of the embedded microprocessor.When the voltage supply is 1V, the cpu microprocessor should be powered on and run.In terms of architecture, it is a 32-Bit system.The CPU operates at a frequency of 1GHz.To learn about the functions of the pins 1031 please refer to their datasheets.Generally, data transfer takes place at a rate of 32b bandwidth.There are many applications for this CPU, since it is Surface Mount mounted.1.05V is the CPU core voltage.In this case, the amount of RAM (Random-Access Memory) is set to 32kB.normally, the microprocessor should not receive a voltage higher than 3.3V.The lowest voltage that should be applied to the micro processor is 1.5V.There are 64 input/output (I/O) channels on the CPU that transfer data.A CPU has a memory size of 64kB bytes.It is possible to tell how busy the CPU is by using 7 counters.A 32-bit conductor is available.
XAM3894CYG Features
XAM3894CYG Features
ARM? Cortex?-A8 Core
32-Bit Structure
32b-Bit Data Bus Width
32kB RAM
64 I/Os
XAM3894CYG Applications
XAM3894CYG ApplicationsThere are a lot of Texas Instruments XAM3894CYG Microprocessors applications.
Hard drives
Oil and gas
Home appliances
Safety -airbags, automatic braking system (ABS)
Nintendo
Industrial instrumentation devices
Process control devices
Volt meter
Petrochemical
DCS control intelligent sensor
