XC1701PD8C
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC1701 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | OTP |
| Memory Size | 1Mb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 15MHz |
| Supply Current-Max | 0.02mA |
| Organization | 1MX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.5974mm |
| Length | 9.3599mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC1701PD8C Overview
An interesting 8-DIP (0.300, 7.62mm) package is used for this.Packaging for the external environment.In the state of 0°C~70°C, licensed to work.OTP is the program that allows it to be programmed.The voltage is 4.75V~5.25V.The memory device is mounted in Through Hole.Data storage is limited to 1Mb bytes.Other components related to "XC1701" can also be found by searching the word.The supply voltage should be 5V.Different functions can be assigned to 8 terminations.As long as the maximum voltage of the memory device is 5.25V, then the memory device can be used.4.75V is the minimum voltage required to supply the device.An example of a CONFIGURATION MEMORY memory chip can be seen in the picture below.In reflow soldering procedure, the temperature should be controlled to no higher than 225.FPGA has pins on the 8 axis.With the help of SERIAL-processing, data is sent through this memory.An operating voltage of 0.02mA is allowed for the memory chip.There is a set of 8 pins that are included with the part.When it comes to speed, this is a memory IC that can work at a frequency of 15MHz, which is very fast.In the memory, the I/O configuration has been set to COMMON.Memory is recommended that a 5V power supply be used.For better service, USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS is included.
XC1701PD8C Features
Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC1701PD8C Applications
There are a lot of Xilinx Inc. XC1701PD8C applications of configuration proms for FPGAs.
- eDRAM
- Cache memory
- telecommunications
- nonvolatile BIOS memory
- workstations,
- eSRAM
- cell phones
- supercomputers
- personal digital assistants
- graphics card
