XC17128ELPC20C
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| HTS Code | 8542.32.00.61 |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC17128EL |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Memory Size | 128kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 15MHz |
| Supply Current-Max | 0.005mA |
| Organization | 128KX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 131072 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17128ELPC20C Overview
This package makes use of the 20-LCC (J-Lead) programming language.External packaging of type Tube.In the state of 0°C~70°C, licensed to work.Using OTP, you can program it.FPGA is fed wFPGAh a voltage of 3V~3.6V.The memory device is mounted in Surface Mount.Data storage is limited to 128kb bytes.Look for "XC17128EL" for other related parts.There is a requirement that it is supplied with a voltage of 3.3V.Various functions can be applied to 20 terminations.A maximum voltage of 3.6V can be applied to this memory device.FPGA is essential that a minimum voltage of 3V be supplied to the device in order for FPGA to function.FPGA is a CONFIGURATION MEMORY memory chip that we are talking about here.If you're reflow soldering, you shouldn't go above 225.In this case, it has 20 pins.This memory transmit data in the SERIAL process way.The memory chip will not operate at a voltage above 0.005mA.Parts come with 20 pins.Taking the speed of the IC into consideration, this is a memory IC that can work at a frequency of 15MHz.In the memory, the I/O configuration has been set to COMMON.The use of a 3.3V power supply is recommended in order to achieve best results.In order to better serve the needs, USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS is included.
XC17128ELPC20C Features
Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC17128ELPC20C Applications
There are a lot of Xilinx Inc. XC17128ELPC20C applications of configuration proms for FPGAs.
- workstations,
- nonvolatile BIOS memory
- graphics card
- Camcorders
- eSRAM
- networks
- printers
- supercomputers
- hard disk drive (HDD)
- data buffer
