XC17128ELPC20I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| HTS Code | 8542.32.00.61 |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC17128EL |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Memory Size | 128kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 15MHz |
| Supply Current-Max | 0.005mA |
| Organization | 128KX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 131072 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17128ELPC20I Overview
This package makes use of the 20-LCC (J-Lead) programming language.External packaging for the Tube series.Qualified to operate within -40°C~85°C.Through OTP, it is programmable.FPGA is powered by a voltage which is 3V~3.6V volts, and this voltage is the voltage from which the generator is powered.There is a memory device mounted in Surface Mount.A data storage size of 128kb is allowed.Try searching "XC17128EL" for more parts.The supply voltage is 3.3V.Various functions can be applied to 20 terminations.In order to use this memory device, a maximum voltage of 3.6V should be used.To supply the device, a minimum voltage of 3V is a must.Using CONFIGURATION MEMORY memory chips, this is what you get.Reflow soldering should be done at no higher than 225 degrees.20 pins are present.Data is transmitted in this memory using a SERIAL process.The memory chip is allowed to operate from a voltage no higher than 0.005mA.As part of the package, the part comes with a set of 20 pins.Speaking of speed, this is a memory IC that can work at a 15MHz frequency.A COMMON configuration is used for the memory's I/O.3.3V power supplies are recommended.Memory features USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS to better serve the need.
XC17128ELPC20I Features
Operating temperature: -40°C~85°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC17128ELPC20I Applications
There are a lot of Xilinx Inc. XC17128ELPC20I applications of configuration proms for FPGAs.
- nonvolatile BIOS memory
- data buffer
- personal computers
- networking
- servers
- Cache memory
- workstations,
- printers
- hard disk drive (HDD)
- networks
