XC17128ELPD8C
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC17128EL |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Memory Size | 128kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 15MHz |
| Supply Current-Max | 0.005mA |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 131072 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.5974mm |
| Length | 9.3599mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17128ELPD8C Overview
This package is based on a neat 8-DIP (0.300, 7.62mm) package which is used by it.Packaging for external use.An individual who is qualified to operate within the 0°C~70°C domain.FPGA is programmable through OTP.There is a voltage of 3V~3.6V applied to the device.Mounted in Through Hole is this memory device.Data storage is limited to 128kb bytes.Other related parts can be found by searching "XC17128EL".Supply voltage 3.3V is required.A termination with different functions in the 8 axis.This memory device can be used with a maximum voltage of 3.6V.FPGA is imperative that the voltage of the device supply is at least 3V if the device is to work properly.A CONFIGURATION MEMORY memory chip like this is used for data storage.Reflow soldering should be done at 225°C maximum.FPGA has 8 pins.Through SERIAL-processing, data is transmitted from this memory to the CPU.Memory chips can operate at a voltage no higher than 0.005mA.8 pins are set with the part.I would like to mention that this is a memory IC that will be able to work at a 15MHz frequency, so I will mention that.The I/O configuration of the memory is COMMON.The use of 3.3V power supplies is recommended.For better service, USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS is included.
XC17128ELPD8C Features
Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC17128ELPD8C Applications
There are a lot of Xilinx Inc. XC17128ELPD8C applications of configuration proms for FPGAs.
- networks
- graphics card
- embedded logic
- main computer memory
- supercomputers
- telecommunications
- networking
- cell phones
- mainframes
- data buffer
