XC17128EPDG8C
| Parameters | |
|---|---|
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC17128E |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | OTP |
| Memory Size | 128kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 15MHz |
| Supply Current-Max | 0.01mA |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 131072 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.5974mm |
| Length | 9.3599mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| Technology | CMOS |
XC17128EPDG8C Overview
The package uses a neat 8-DIP (0.300, 7.62mm) interface.Packing on the outside is Tube.Licensed to operate in 0°C~70°C.OTP is the program that allows it to be programmed.This device is fed with a voltage of 4.75V~5.25V which is applied to it.I have mounted this memory device in Through Hole.There is a limit of 128kb MB for the amount of data that can be stored.To find other similar parts, search for "XC17128E".There is a voltage requirement of 5V for supplying it with power.8 terminations with different functions.5.25V is the maximum voltage that can be used with this memory device.An operating voltage of 4.75V is required in order to supply the device.The memory chip in question is a CONFIGURATION MEMORY memory chip.In reflow soldering, the temperature should be controlled to a maximum of 250 degrees during the process.Pins on it are 8-shaped.In this memory, data is transmitted using the SERIAL process.A memory chip can operate at a voltage no greater than 0.01mA.Parts include 8 pins.Speaking of speed, this is a memory IC that can work at a 15MHz frequency.There is a configuration of COMMON for the memory's I/O.A power supply that is rated at 5V is recommended for use with this product.The inclusion of USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS will help customers better meet their needs.
XC17128EPDG8C Features
Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC17128EPDG8C Applications
There are a lot of Xilinx Inc. XC17128EPDG8C applications of configuration proms for FPGAs.
- workstations,
- telecommunications
- cell phones
- supercomputers
- hard disk drive (HDD)
- networking
- eDRAM
- Camcorders
- eSRAM
- networks
