XC17256ELPC20C
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| HTS Code | 8542.32.00.61 |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC17256EL |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Memory Size | 256Kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 15MHz |
| Supply Current-Max | 0.005mA |
| Organization | 256KX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 262144 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17256ELPC20C Overview
There is a neat 20-LCC (J-Lead) package that is used in this program.Packing on the outside is Tube.0°C~70°C license holder.OTP allows for programmability.A voltage of 3V~3.6V is applied to it.Surface Mount is the mounting position of this memory device.Data storage is limited to 256Kb bytes.To find other similar parts, search for "XC17256EL".The supply voltage should be 3.3V.20 terminations with different functions.3.6V is the maximum voltage that can be used with this memory device.3V is the minimum voltage required to supply the device.FPGA is a CONFIGURATION MEMORY memory chip that we are talking about here.If you're reflow soldering, you shouldn't go above 225.20 pins are present.This memory transmit data in the SERIAL process way.Memory chips can operate at a voltage no higher than 0.005mA.20 pins are set with the part.Using a 15MHz frequency, this memory IC can work at high speeds.The I/O configuration of the memory is COMMON.The use of 3.3V power supplies is recommended.For better service, USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS is included.
XC17256ELPC20C Features
Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC17256ELPC20C Applications
There are a lot of Xilinx Inc. XC17256ELPC20C applications of configuration proms for FPGAs.
- mainframes
- cell phones
- nonvolatile BIOS memory
- networking
- data buffer
- main computer memory
- printers
- hard disk drive (HDD)
- graphics card
- telecommunications
