XC17256ELPC20I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| HTS Code | 8542.32.00.61 |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC17256EL |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Memory Size | 256Kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 15MHz |
| Supply Current-Max | 0.005mA |
| Organization | 256KX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 262144 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17256ELPC20I Overview
There is a neat 20-LCC (J-Lead) package that is used in this program.Packaging for the external use of Tube.A qualified individual to operate within -40°C~85°C is required.This device can be programmed using the OTP language.This device is fed with a voltage of 3V~3.6V which is applied to it.I have mounted this memory device in Surface Mount.Data storage is limited to a size of 256Kb bytes.You can search "XC17256EL" for other related parts.The supply voltage should be 3.3V.20 terminations with different functions.A maximum voltage of 3.6V can be applied to this memory device.3V must be the minimum voltage supplied to the device.Using CONFIGURATION MEMORY memory chips, this is what you get.If you're reflow soldering, you shouldn't go above 225.The 20 pins are on the board.By using SERIAL-processing, data can be transmitted through this memory in a secure manner.An operating voltage of 0.005mA is allowed for the memory chip.Parts come with 20 pins.There is a memory IC in this package that works at 15MHz frequencies.A COMMON configuration is used for the memory's I/O.A power supply that is rated at 3.3V is recommended for use with this product.In order to better serve the needs, USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS is included.
XC17256ELPC20I Features
Operating temperature: -40°C~85°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC17256ELPC20I Applications
There are a lot of Xilinx Inc. XC17256ELPC20I applications of configuration proms for FPGAs.
- workstations,
- eDRAM
- Camcorders
- telecommunications
- DVD disk buffer
- cell phones
- hard disk drive (HDD)
- Cache memory
- main computer memory
- data buffer
