XC17256ELVO8C
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC17256EL |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Memory Size | 256Kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 15MHz |
| Supply Current-Max | 0.005mA |
| Organization | 256KX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 262144 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Length | 4.9276mm |
| Width | 3.937mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17256ELVO8C Overview
The package uses a neat 8-SOIC (0.154, 3.90mm Width) interface.Packaging for Tube.Qualified to operate within 0°C~70°C.With the help of OTP, it can be programmed.This device is fed with a voltage of 3V~3.6V which is applied to it.Surface Mount is the mounting position of this memory device.256Kb is the maximum storage size.XC17256EL will give you other related parts.3.3V is the required supply voltage.There are different functions that can be applied on the 8 axis when it comes to terminating.This memory device can be used with a maximum voltage of 3.6V.An operating voltage of 3V is required in order to supply the device.FPGA is a CONFIGURATION MEMORY memory chip that we are talking about here.If you're reflow soldering, you shouldn't go above 225.8 pins are located on the board.As a result of the SERIAL process, data is transmitted from this memory.The memory chip is allowed to operate from a voltage no higher than 0.005mA.In the package, you will find a set of 8 pins.Using a 15MHz frequency, this memory IC can work at high speeds.A COMMON configuration is used for the memory's I/O.The best power supply to use is a 3.3V power supply, which is highly recommended.The inclusion of USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS will help customers better meet their needs.
XC17256ELVO8C Features
Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC17256ELVO8C Applications
There are a lot of Xilinx Inc. XC17256ELVO8C applications of configuration proms for FPGAs.
- data buffer
- networks
- cell phones
- nonvolatile BIOS memory
- multimedia computers
- personal computers
- graphics card
- servers
- telecommunications
- workstations,
