XC17256EPC20I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| HTS Code | 8542.32.00.61 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC17256E |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | OTP |
| Memory Size | 256Kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 15MHz |
| Supply Current-Max | 0.01mA |
| Organization | 256KX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 262144 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17256EPC20I Overview
An interesting 20-LCC (J-Lead) package is used.The external packaging of Tube is made of Tube plastic.-40°C~85°C license holder.This device can be programmed using the OTP language.This device is fed with a voltage of 4.5V~5.5V which is applied to it.There is a memory device mounted in Surface Mount position for this device.The size of data storage is limited to 256Kb.For other related parts, search "XC17256E".In order for it to function, it requires a voltage supply of 5V.There are different functions that can be applied on the 20 axis when it comes to terminating.With 5.5V as the maximum voltage, the memory device can be used.4.5V must be the minimum voltage supplied to the device.FPGA is a CONFIGURATION MEMORY memory chip that we are talking about here.The temperature should be kept below 225 in reflow soldering.There are 20 pins on it.SERIAL-process memory transmits data.In order for a memory chip to operate, it must not be subjected to a voltage greater than 0.01mA.Parts include 20 pins.FPGA is a 15MHz-frequency memory IC.There is a configuration of COMMON for the memory's I/O.In order to obtain the best performance, it is recommended to use a 5V power supply.For better service, USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS is included.
XC17256EPC20I Features
Operating temperature: -40°C~85°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC17256EPC20I Applications
There are a lot of Xilinx Inc. XC17256EPC20I applications of configuration proms for FPGAs.
- telecommunications
- supercomputers
- cell phones
- Camcorders
- graphics card
- embedded logic
- DVD disk buffer
- personal computers
- Cache memory
- data buffer
