XC17256EPD8I
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC17256E |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | OTP |
| Memory Size | 256Kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 15MHz |
| Supply Current-Max | 0.01mA |
| Organization | 256KX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 262144 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.5974mm |
| Length | 9.3599mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17256EPD8I Overview
FPGA uses a nice 8-DIP (0.300, 7.62mm) package that makes FPGA easy to use.Tube external packaging.Qualified to perform a variety of tasks within the -40°C~85°C environment.Through OTP, it is programmable.This device is fed with a voltage of 4.5V~5.5V which is applied to it.FPGA is mounted in Through Hole.There is a limit of 256Kb MB for the amount of data that can be stored.XC17256E will give you other related parts.Supply voltage 5V is required.There are different functions that can be applied on the 8 axis when it comes to terminating.As long as the maximum voltage of the memory device is 5.5V, then the memory device can be used.If the device needs to be supplied with power, then a minimum voltage of 4.5V is required.FPGA is a CONFIGURATION MEMORY memory chip that we are talking about here.In reflow soldering, the temperature should be controlled to a maximum of 225 degrees during the process.FPGA has pins on the 8 axis.Through SERIAL-processing, data is transmitted from this memory to the CPU.An operating voltage of 0.01mA is allowed for the memory chip.Parts come with 8 pins.FPGA is a 15MHz-frequency memory IC.There is a COMMON configuration for the memory's I/O.The use of a 5V power supply is recommended in order to achieve best results.For better service, USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS is included.
XC17256EPD8I Features
Operating temperature: -40°C~85°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC17256EPD8I Applications
There are a lot of Xilinx Inc. XC17256EPD8I applications of configuration proms for FPGAs.
- servers
- networks
- workstations,
- eSRAM
- eDRAM
- Cache memory
- Camcorders
- graphics card
- hard disk drive (HDD)
- mainframes
