XC17256EPDG8C
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC17256E |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | OTP |
| Memory Size | 256Kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 15MHz |
| Supply Current-Max | 0.01mA |
| Organization | 256KX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 262144 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.5974mm |
| Length | 9.3599mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
XC17256EPDG8C Overview
FPGA uses a neat 8-DIP (0.300, 7.62mm) package.Packaging outside of Tube.Qualified to perform a variety of tasks within the 0°C~70°C environment.Using OTP, you can program it.The voltage fed to it is 4.75V~5.25V.The memory device is mounted in Through Hole.A data storage size of 256Kb is allowed.Other components related to "XC17256E" can also be found by searching the word.In order for it to function, it requires a voltage supply of 5V.A termination with different functions in the 8 axis.A maximum voltage of 5.25V can be applied to this memory device.4.75V is the minimum voltage required to supply the device.An example of a CONFIGURATION MEMORY memory chip can be seen in the picture below.If you're reflow soldering, you shouldn't go above 250.There are 8 pins on it.As a result of the SERIAL process, data is transmitted from this memory.For the memory chip to operate, it requires a voltage not exceeding 0.01mA.There is a set of 8 pins included with the part.In terms of speed, this is a memory IC that operates at a 15MHz frequency.This memory has a COMMON configuration for its I/O.Memory is recommended to use a 5V power supply.Thus, USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS is included to better serve customers.
XC17256EPDG8C Features
Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC17256EPDG8C Applications
There are a lot of Xilinx Inc. XC17256EPDG8C applications of configuration proms for FPGAs.
- multimedia computers
- graphics card
- eDRAM
- cell phones
- printers
- data buffer
- hard disk drive (HDD)
- eSRAM
- telecommunications
- personal computers
