XC1736EPC20C
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| HTS Code | 8542.32.00.61 |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC1736E |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | OTP |
| Memory Size | 36kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 10MHz |
| Supply Current-Max | 0.01mA |
| Organization | 36288X1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 36288 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC1736EPC20C Overview
The package uses a neat 20-LCC (J-Lead) interface.External packaging for the Tube series.In the state of 0°C~70°C, licensed to work.Through OTP, it is programmable.This device is fed with a voltage of 4.75V~5.25V which is applied to it.FPGA is mounted in Surface Mount.A maximum of 36kb bytes of data can be stored.Other related parts can be found by searching "XC1736E".The supply voltage is 5V.20 terminations with different functions.5.25V is the maximum voltage that can be used with this memory device.There must be a minimum voltage of 4.75V to supply the device with the power it needs.FPGA is a CONFIGURATION MEMORY memory chip that we are talking about here.In reflow soldering procedure, the temperature should be controlled to no higher than 225.There are 20 pins on it.A SERIAL-processing method is used to transfer data through this memory.An operating voltage of 0.01mA is allowed for the memory chip.Parts come with 20 pins set.Speaking of speed, this is a memory IC that can work at a 10MHz frequency.The memory's I/O is configured to be COMMON in terms of its configuration.Memory is recommended that a 5V power supply be used.Thus, USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS is included to better serve customers.
XC1736EPC20C Features
Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC1736EPC20C Applications
There are a lot of Xilinx Inc. XC1736EPC20C applications of configuration proms for FPGAs.
- mainframes
- cell phones
- data buffer
- eSRAM
- hard disk drive (HDD)
- servers
- printers
- embedded logic
- Cache memory
- supercomputers
