XC1736ESO8C
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC1736E |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | OTP |
| Memory Size | 36kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 10MHz |
| Supply Current-Max | 0.01mA |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 1.7272mm |
| Length | 4.9276mm |
| Width | 3.937mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC1736ESO8C Overview
The package uses a neat 8-SOIC (0.154, 3.90mm Width) interface.Tube external packaging.Qualified to operate within 0°C~70°C.With the help of OTP, it can be programmed.The voltage fed to it is 4.75V~5.25V.Mounted in Surface Mount is this memory device.Data storage is limited to a size of 36kb bytes.XC1736E will give you other related parts.There is a voltage requirement of 5V for supplying it with power.FPGA is possible to connect different functions on the 8 axis at different terminations.A maximum voltage of 5.25V can be applied to this memory device.There must be a minimum voltage of 4.75V to supply the device with the power it needs.A CONFIGURATION MEMORY memory chip is shown here.The reflow soldering process should be done at a temperature no higher than 225.8 pins are located on the board.In this memory, data is transmitted using the SERIAL process.In order for a memory chip to function properly, it must be subjected to a voltage of not more than 0.01mA.8 pins are set with the part.Using a 10MHz frequency, this memory IC can work at high speeds.The I/O configuration of the memory is COMMON.In order to obtain the best performance, it is recommended to use a 5V power supply.Thus, USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS is included to better serve customers.
XC1736ESO8C Features
Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC1736ESO8C Applications
There are a lot of Xilinx Inc. XC1736ESO8C applications of configuration proms for FPGAs.
- data buffer
- workstations,
- eSRAM
- personal digital assistants
- networking
- networks
- graphics card
- nonvolatile BIOS memory
- main computer memory
- DVD disk buffer
