XC1736ESO8I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC1736E |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | OTP |
| Memory Size | 36kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 10MHz |
| Supply Current-Max | 0.01mA |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 1.7272mm |
| Length | 4.9276mm |
| Width | 3.937mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC1736ESO8I Overview
FPGA uses a neat 8-SOIC (0.154, 3.90mm Width) package.Packaging for the external environment.Qualified to perform a variety of tasks within the -40°C~85°C environment.This device can be programmed using OTP.There is a voltage of 4.5V~5.5V applied to the device.This memory device is mounted in Surface Mount.There is a limit to the size of data storage of 36kb bytes.Other related parts can be found by searching "XC1736E".The supply voltage should be 5V.A termination with different functions in the 8 axis.FPGA is possible to use this memory device wFPGAh a maximum voltage of 5.5V.To supply the device, a minimum voltage of 4.5V is a must.Using the CONFIGURATION MEMORY memory chip, we can store data.Reflow soldering should be done at no higher than 225 degrees.A 8 pin is included in it.SERIAL-processing is used to transmit data through this memory using the SERIAL-processing algorithm.The memory chip is allowed to operate from a voltage no higher than 0.01mA.As part of the package, the part comes with a set of 8 pins.In terms of speed, this is a memory IC that operates at a 10MHz frequency.The memory's I/O is configured to be COMMON in terms of its configuration.5V power supplies are recommended.Therefore, USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS is included in order to better meet customer needs.
XC1736ESO8I Features
Operating temperature: -40°C~85°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC1736ESO8I Applications
There are a lot of Xilinx Inc. XC1736ESO8I applications of configuration proms for FPGAs.
- printers
- nonvolatile BIOS memory
- networking
- cell phones
- multimedia computers
- mainframes
- hard disk drive (HDD)
- DVD disk buffer
- Camcorders
- main computer memory
