XC17512LPD8I
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC17512L |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Memory Size | 512kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 15MHz |
| Supply Current-Max | 0.005mA |
| Organization | 512KX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.5974mm |
| Length | 9.3599mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17512LPD8I Overview
This package makes use of the 8-DIP (0.300, 7.62mm) programming language.Packaging for the external use of Tube.A qualified individual who has the ability to operate within -40°C~85°C.This device can be programmed using OTP.FPGA is fed wFPGAh a voltage of 3V~3.6V.I have mounted this memory device in Through Hole.A maximum of 512kb bytes of data can be stored.To find other similar parts, search for "XC17512L".3.3V is the required supply voltage.There are different functions that can be applied on the 8 axis when it comes to terminating.FPGA is possible to use this memory device at a maximum voltage of 3.6V.If the device needs to be supplied with power, then a minimum voltage of 3V is required.Using CONFIGURATION MEMORY memory chips, this is what you get.Reflow soldering should be done at no higher than 225 degrees.FPGA is equipped wFPGAh 8 pins.Through SERIAL-processing, data is transmitted from this memory to the CPU.Memory chips can operate at a voltage no higher than 0.005mA.There is a set of 8 pins that are included with the part.Speaking of speed, this is a memory IC that can work at a 15MHz frequency.In the memory, the I/O configuration has been set to COMMON.A power supply that is rated at 3.3V is recommended for use with this product.Our product line now includes USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS in order to provide a better level of service to our customers.
XC17512LPD8I Features
Operating temperature: -40°C~85°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC17512LPD8I Applications
There are a lot of Xilinx Inc. XC17512LPD8I applications of configuration proms for FPGAs.
- networks
- multimedia computers
- personal digital assistants
- servers
- workstations,
- main computer memory
- DVD disk buffer
- hard disk drive (HDD)
- personal computers
- cell phones
