XC1765ELVO8I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC1765EL |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Memory Size | 65kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 2.5MHz |
| Supply Current-Max | 0.005mA |
| Organization | 64KX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 65536 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Length | 4.9276mm |
| Width | 3.937mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC1765ELVO8I Overview
An interesting 8-SOIC (0.154, 3.90mm Width) package is used for this.Packaging for Tube.Licensed to operate in -40°C~85°C.With the help of OTP, it can be programmed.FPGA is powered by a voltage which is 3V~3.6V volts, and this voltage is the voltage from which the generator is powered.The memory device is mounted in Surface Mount.The size of data storage is limited to 65kb.You can search "XC1765EL" for other related parts.The supply voltage should be 3.3V.Different functions can be assigned to 8 terminations.Using this memory device with a maximum voltage of 3.6V is possible.Minimum voltage 3V is required for the device to work.Using the CONFIGURATION MEMORY memory chip, we can store data.Reflow soldering should be done at 225°C maximum.FPGA is equipped wFPGAh 8 pins.With the help of SERIAL-processing, data is sent through this memory.The memory chip is allowed to operate at a voltage that is no greater than 0.005mA.There is a set of 8 pins that are included with the part.I would like to mention that this is a memory IC that will be able to work at a 2.5MHz frequency, so I will mention that.The memory's I/O is configured as COMMON.Using a 3.3V power supply is recommended for best results.The inclusion of USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS will help customers better meet their needs.
XC1765ELVO8I Features
Operating temperature: -40°C~85°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC1765ELVO8I Applications
There are a lot of Xilinx Inc. XC1765ELVO8I applications of configuration proms for FPGAs.
- hard disk drive (HDD)
- networks
- telecommunications
- supercomputers
- eDRAM
- networking
- main computer memory
- embedded logic
- mainframes
- personal computers
