XC1765ESOG8C
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC1765E |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | OTP |
| Memory Size | 65kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 10MHz |
| Supply Current-Max | 0.01mA |
| Organization | 64KX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 65536 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 1.7272mm |
| Length | 4.9276mm |
| Width | 3.937mm |
| RoHS Status | RoHS Compliant |
XC1765ESOG8C Overview
This package makes use of the 8-SOIC (0.154, 3.90mm Width) programming language.Packaging for Tray.A qualified individual to operate within 0°C~70°C is required.The OTP programming language can be used to program it.FPGA is powered by a voltage which is 4.75V~5.25V volts, and this voltage is the voltage from which the generator is powered.I have mounted this memory device in Surface Mount.Data storage is limited to 65kb bytes.In addition to this part, you can search "XC1765E" for other similar parts.There is a requirement that it is supplied with a voltage of 5V.Various functions can be applied to 8 terminations.FPGA is possible to use this memory device at a maximum voltage of 5.25V.There must be a minimum voltage of 4.75V to supply the device with the power it needs.An CONFIGURATION MEMORY memory chip.Reflow soldering should be done at no higher than 250 degrees.Pins on it are 8-shaped.By using SERIAL-processing, data can be transmitted through this memory in a secure manner.An operating voltage of 0.01mA is allowed for the memory chip.There is a set of 8 pins that are included with the part.I think it's important to point out that this is a memory IC that has a 10MHz frequency that can be operated at.Memory is configured as COMMON for memory's I/O.A power supply that is rated at 5V is recommended for use with this product.Memory features USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS to better serve the need.
XC1765ESOG8C Features
Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC1765ESOG8C Applications
There are a lot of Xilinx Inc. XC1765ESOG8C applications of configuration proms for FPGAs.
- networking
- data buffer
- hard disk drive (HDD)
- eDRAM
- networks
- DVD disk buffer
- supercomputers
- multimedia computers
- workstations,
- graphics card
