XC17S100ASO20I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.32.00.71 |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC17S100A |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Supply Current-Max | 0.015mA |
| Organization | 781216X1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Density | 1 Mb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17S100ASO20I Overview
The package uses a neat 20-SOIC (0.295, 7.50mm Width) interface.Packing on the outside is Tube.Licensed to operate in -40°C~85°C.The OTP programming language can be used to program it.The voltage fed to it is 3V~3.6V.I have mounted this memory device in Surface Mount.Other components related to "XC17S100A" can also be found by searching the word.In order for it to function, it requires a voltage supply of 3.3V.With different functions, 20 terminations can be used.As long as the maximum voltage of the memory device is 3.6V, then the memory device can be used.If the device needs to be supplied with power, then a minimum voltage of 3V is required.A CONFIGURATION MEMORY memory chip like this is used for data storage.Reflow soldering should be done at no higher than 225 degrees.There are 20 pins on it.Through SERIAL-processing, data is transmitted from this memory to the CPU.For the memory chip to operate, it requires a voltage not exceeding 0.015mA.With the part are included 20 pins.A COMMON configuration is used for the memory's I/O.The 3.3V company recommends that users apply 3.3V to a part before using it so the part will be able to run safely and reliably in a circuit.
XC17S100ASO20I Features
Operating temperature: -40°C~85°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC17S100ASO20I Applications
There are a lot of Xilinx Inc. XC17S100ASO20I applications of configuration proms for FPGAs.
- DVD disk buffer
- embedded logic
- networking
- hard disk drive (HDD)
- multimedia computers
- servers
- eDRAM
- networks
- nonvolatile BIOS memory
- mainframes
