XC17S200AVOG8C
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC17S200A |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Memory Size | 2Mb |
| Supply Current-Max | 0.015mA |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.001A |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 1.2mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
XC17S200AVOG8C Overview
The package uses a neat 8-SOIC (0.154, 3.90mm Width) interface.Tray external packaging.Licensed to operate in 0°C~70°C.Using OTP, you can program it.There is a voltage of 3V~3.6V applied to the device.The memory device is mounted in Surface Mount.The size of data storage is limited to 2Mb.Other related parts can be found by searching "XC17S200A".3.3V is the required supply voltage.Different types of 8 terminations are available with different functions.FPGA is possible to use this memory device wFPGAh a maximum voltage of 3.6V.FPGA is imperative that the voltage of the device supply is at least 3V if the device is to work properly.This is a CONFIGURATION MEMORY memory chip.If reflow soldering is being performed, the temperature should not be higher than 260 when soldering should be reflowed.Pins on it are 8-shaped.SERIAL-process memory transmits data.For the memory chip to operate, it requires a voltage not exceeding 0.015mA.There is a set of 8 pins included with the part.There is a configuration of COMMON for the memory's I/O.Using 3.3V on the part before use will help the part run safely and reliably in a circuit.
XC17S200AVOG8C Features
Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC17S200AVOG8C Applications
There are a lot of Xilinx Inc. XC17S200AVOG8C applications of configuration proms for FPGAs.
- personal digital assistants
- eDRAM
- DVD disk buffer
- servers
- networking
- workstations,
- hard disk drive (HDD)
- eSRAM
- networks
- personal computers
