XC17S30ASO20I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.32.00.71 |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC17S30 |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Memory Size | 300kb |
| Supply Current-Max | 0.005mA |
| Organization | 336768X1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Density | 512 kb |
| Standby Current-Max | 0.00005A |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17S30ASO20I Overview
An interesting 20-SOIC (0.295, 7.50mm Width) package is used.External packaging for the Tube series.Qualified to perform a variety of tasks within the -40°C~85°C environment.The OTP programming language can be used to program it.FPGA is powered by a voltage which is 3V~3.6V volts, and this voltage is the voltage from which the generator is powered.The memory device is mounted in the Surface Mount position.A maximum of 300kb bytes of data can be stored.Try searching "XC17S30" for more parts.FPGA reuqires a supply voltage of 3.3V.FPGA is possible to connect different functions on the 20 axis at different terminations.There is a maximum voltage of 3.6V that can be applied to this memory device.An operating voltage of 3V is required in order to supply the device.A CONFIGURATION MEMORY memory chip is shown here.If you're reflow soldering, you shouldn't go above 225.In this case, it has 20 pins.By using SERIAL-processing, data can be transmitted through this memory in a secure manner.The memory chip will not operate at a voltage above 0.005mA.There is a set of 20 pins that are included with the part.The memory's I/O is configured as COMMON.A 3.3V application is recommended before using the part in a circuit to ensure the part runs safely and reliably.
XC17S30ASO20I Features
Operating temperature: -40°C~85°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC17S30ASO20I Applications
There are a lot of Xilinx Inc. XC17S30ASO20I applications of configuration proms for FPGAs.
- hard disk drive (HDD)
- nonvolatile BIOS memory
- supercomputers
- servers
- personal computers
- eSRAM
- mainframes
- cell phones
- telecommunications
- eDRAM
