XC17S40PD8I
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC17S40 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | OTP |
| Memory Size | 400kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 10MHz |
| Supply Current-Max | 0.01mA |
| Organization | 329312X1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 329312 bit |
| I/O Type | COMMON |
| Memory IC Type | MEMORY CIRCUIT |
| Height Seated (Max) | 4.5974mm |
| Length | 9.3599mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17S40PD8I Overview
This package is based on a neat 8-DIP (0.300, 7.62mm) package which is used by it.Packaging for the external environment.A qualified individual who has the ability to operate within -40°C~85°C.OTP is the program that allows it to be programmed.There is a voltage of 4.5V~5.5V applied to the device.FPGA is mounted in Through Hole.Data storage is limited to a size of 400kb bytes.Other related parts can be found by searching "XC17S40".There is a requirement that it is supplied with a voltage of 5V.There are different functions that can be applied on the 8 axis when it comes to terminating.With 5.5V as the maximum voltage, the memory device can be used.Minimum voltage 4.5V is required for the device to work.The memory chip in this picture is called a MEMORY CIRCUIT memory chip.The reflow soldering process should be done at a temperature no higher than 225.FPGA is equipped wFPGAh 8 pins.An operating voltage of 0.01mA is allowed for the memory chip.Parts come with 8 pins.I would like to mention that this is a memory IC that will be able to work at a 10MHz frequency, so I will mention that.There is a COMMON configuration for the memory's I/O.In order to obtain the best performance, it is recommended to use a 5V power supply.
XC17S40PD8I Features
Operating temperature: -40°C~85°C.
OTP program capability.
MEMORY CIRCUIT memory IC.
COMMON I/O equipped.
XC17S40PD8I Applications
There are a lot of Xilinx Inc. XC17S40PD8I applications of configuration proms for FPGAs.
- cell phones
- eSRAM
- mainframes
- servers
- graphics card
- telecommunications
- Camcorders
- main computer memory
- eDRAM
- workstations,
