banner_page

XC17S40SO20I

Surface Mount 400kb Mb Tube Configuration Proms for FPGAs 1 (Unlimited) OTP Obsolete XC17S40 not_compliant


  • Manufacturer: Xilinx Inc.
  • Nocochips NO: 903-XC17S40SO20I
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 230
  • Description: Surface Mount 400kb Mb Tube Configuration Proms for FPGAs 1 (Unlimited) OTP Obsolete XC17S40 not_compliant (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Surface Mount YES
Number of Pins 20
Operating Temperature -40°C~85°C
Packaging Tube
Published 1999
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
HTS Code 8542.32.00.61
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 1.27mm
Reach Compliance Code not_compliant
Base Part Number XC17S40
Pin Count 20
Qualification Status Not Qualified
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 5V
Supply Voltage-Min (Vsup) 4.5V
Programmable Type OTP
Memory Size 400kb
Operating Mode SYNCHRONOUS
Clock Frequency 10MHz
Supply Current-Max 0.01mA
Organization 329312X1
Output Characteristics 3-STATE
Memory Width 1
Standby Current-Max 0.00005A
Memory Density 329312 bit
I/O Type COMMON
Memory IC Type MEMORY CIRCUIT
Height Seated (Max) 2.65mm
Length 12.8mm
Width 7.5mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

XC17S40SO20I Overview


An interesting 20-SOIC (0.295, 7.50mm Width) package is used.Packaging for the external use of Tube.A qualified individual who has the ability to operate within -40°C~85°C.The OTP programming language can be used to program it.An electric current of 4.5V~5.5V is applied to it.Mounted in Surface Mount is this memory device.A maximum of 400kb bytes of data can be stored.Other components related to "XC17S40" can also be found by searching the word.There is a voltage requirement of 5V for supplying it with power.With different functions, 20 terminations can be used.In order to use this memory device, a maximum voltage of 5.5V should be used.Minimum voltage 4.5V is required for the device to work.A MEMORY CIRCUIT memory chip like this is used for data storage.The 20 pins are on the board.The memory chip is allowed to operate from a voltage no higher than 0.01mA.20 pins are set with the part.FPGA is a 10MHz-frequency memory IC.A COMMON configuration is used for the memory's I/O.In order to obtain the best performance, it is recommended to use a 5V power supply.

XC17S40SO20I Features


Operating temperature: -40°C~85°C.
OTP program capability.
MEMORY CIRCUIT memory IC.
COMMON I/O equipped.

XC17S40SO20I Applications


There are a lot of Xilinx Inc. XC17S40SO20I applications of configuration proms for FPGAs.

  • printers
  • cell phones
  • nonvolatile BIOS memory
  • hard disk drive (HDD)
  • Cache memory
  • personal computers
  • supercomputers
  • main computer memory
  • workstations,
  • multimedia computers

Write a review

Note: HTML is not translated!
    Bad           Good