XC17S40XLSO20I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.32.00.61 |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Base Part Number | XC17S40XL |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Memory Size | 400kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 10MHz |
| Supply Current-Max | 0.005mA |
| Organization | 330696X1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 330696 bit |
| I/O Type | COMMON |
| Memory IC Type | MEMORY CIRCUIT |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17S40XLSO20I Overview
FPGA uses a nice 20-SOIC (0.295, 7.50mm Width) package that makes FPGA easy to use.Packaging outside of Tube.A qualified individual to operate within -40°C~85°C is required.OTP allows for programmability.The voltage is 3V~3.6V.The memory device is mounted in the Surface Mount position.There is a limit of 400kb MB for the amount of data that can be stored.In addition to this part, you can search "XC17S40XL" for other similar parts.In order for it to function, it requires a voltage supply of 3.3V.A termination with different functions in the 20 axis.FPGA is possible to use this memory device at a maximum voltage of 3.6V.An operating voltage of 3V is required in order to supply the device.The memory chip in question is a MEMORY CIRCUIT memory chip.There are 20 pins on it.The memory chip will not operate at a voltage above 0.005mA.Parts come with 20 pins set.Speaking of speed, this is a memory IC that can work at a 10MHz frequency.In the memory, the I/O configuration has been set to COMMON.Using a 3.3V power supply is recommended for best results.
XC17S40XLSO20I Features
Operating temperature: -40°C~85°C.
OTP program capability.
MEMORY CIRCUIT memory IC.
COMMON I/O equipped.
XC17S40XLSO20I Applications
There are a lot of Xilinx Inc. XC17S40XLSO20I applications of configuration proms for FPGAs.
- telecommunications
- mainframes
- networks
- cell phones
- embedded logic
- eDRAM
- workstations,
- personal digital assistants
- Camcorders
- hard disk drive (HDD)
