XC17V01PC20I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.32.00.61 |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC17V01 |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Memory Size | 1Mb |
| Clock Frequency | 15MHz |
| Supply Current-Max | 0.015mA |
| Organization | 1MX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.001A |
| Memory Density | 1048576 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17V01PC20I Overview
The package uses a neat 20-LCC (J-Lead) interface.Packaging outside of Tube.As a qualified employee, I can operate within -40°C~85°C.This device can be programmed using the OTP language.There is a voltage of 3V~3.6V applied to the device.There is a memory device mounted in Surface Mount.Currently, data storage can only store data up to 1Mb bytes.XC17V01 will give you other related parts.There is a requirement that it is supplied with a voltage of 3.3V.Different functions are associated with 20 terminations.There is a maximum voltage of 3.6V that can be applied to this memory device.There must be a minimum voltage of 3V to supply the device with the power it needs.An example of a CONFIGURATION MEMORY memory chip can be seen in the picture below.The temperature should be kept below 225 in reflow soldering.A 20 pin is included in it.As a result of the SERIAL process, data is transmitted from this memory.The memory chip operates at a voltage of no more than 0.015mA.20 pins are set with the part.FPGA is a 15MHz-frequency memory IC.This memory has a COMMON configuration for its I/O.Prior to the use of the part in a circuit, it is recommended that users apply the 3.3V to the part so that the part will run as safely and reliably as possible.
XC17V01PC20I Features
Operating temperature: -40°C~85°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC17V01PC20I Applications
There are a lot of Xilinx Inc. XC17V01PC20I applications of configuration proms for FPGAs.
- supercomputers
- personal computers
- workstations,
- data buffer
- Camcorders
- cell phones
- networking
- eSRAM
- Cache memory
- embedded logic
