XC17V02PC44I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.32.00.61 |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC17V02 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Clock Frequency | 15MHz |
| Supply Current-Max | 0.015mA |
| Organization | 2MX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Density | 2 Mb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17V02PC44I Overview
This package makes use of the 44-LCC (J-Lead) programming language.Packaging outside of Tube.Qualified to perform a variety of tasks within the -40°C~85°C environment.This device can be programmed using OTP.The voltage is 3V~3.6V.The memory device is mounted in the Surface Mount position.Other related parts can be found by searching "XC17V02".There is a requirement that it is supplied with a voltage of 3.3V.With different functions, 44 terminations can be used.FPGA is possible to use this memory device at a maximum voltage of 3.6V.FPGA is imperative that the voltage of the device supply is at least 3V if the device is to work properly.Using CONFIGURATION MEMORY memory chips, this is what you get.If you're reflow soldering, you shouldn't go above 225.There are 44 pins on it.As a result of the SERIAL process, data is transmitted from this memory.The memory chip is allowed to operate at a voltage that is no greater than 0.015mA.In the package, you will find a set of 44 pins.FPGA is a 15MHz-frequency memory IC.The memory's I/O is configured as COMMON.Before using the part in a circuit, it is recommended that the user apply 3.3V before the part is used in order to ensure that it runs safely and reliably in the circuit.
XC17V02PC44I Features
Operating temperature: -40°C~85°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC17V02PC44I Applications
There are a lot of Xilinx Inc. XC17V02PC44I applications of configuration proms for FPGAs.
- cell phones
- telecommunications
- eSRAM
- DVD disk buffer
- supercomputers
- printers
- graphics card
- nonvolatile BIOS memory
- networks
- Camcorders
