banner_page

XC17V16VQ44I

Surface Mount Tray Configuration Proms for FPGAs 3 (168 Hours) OTP Obsolete XC17V16


  • Manufacturer: Xilinx Inc.
  • Nocochips NO: 903-XC17V16VQ44I
  • Package: 44-TQFP
  • Datasheet: PDF
  • Stock: 512
  • Description: Surface Mount Tray Configuration Proms for FPGAs 3 (168 Hours) OTP Obsolete XC17V16 (Kg)

Details

Tags

Parameters
Density 16 Mb
Standby Current-Max 0.001A
Parallel/Serial PARALLEL/SERIAL
I/O Type COMMON
Memory IC Type CONFIGURATION MEMORY
Height Seated (Max) 1.2mm
Length 10mm
Width 10mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead
Mounting Type Surface Mount
Package / Case 44-TQFP
Surface Mount YES
Number of Pins 44
Operating Temperature -40°C~85°C
Packaging Tray
Published 1998
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 44
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
HTS Code 8542.32.00.71
Technology CMOS
Voltage - Supply 3V~3.6V
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 225
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.8mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number XC17V16
Pin Count 44
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Programmable Type OTP
Clock Frequency 20MHz
Supply Current-Max 0.1mA
Organization 2MX8
Output Characteristics 3-STATE
Memory Width 8

XC17V16VQ44I Overview


FPGA uses a neat 44-TQFP package.Packaging for the external environment.A qualified individual to operate within -40°C~85°C is required.This device can be programmed using OTP.FPGA is powered by a voltage which is 3V~3.6V volts, and this voltage is the voltage from which the generator is powered.FPGA is mounted in Surface Mount.Other components related to "XC17V16" can also be found by searching the word.The supply voltage is 3.3V.Various functions can be applied to 44 terminations.FPGA is possible to use this memory device at a maximum voltage of 3.6V.An operating voltage of 3V is required in order to supply the device.This is a CONFIGURATION MEMORY memory chip.FPGA is recommended that the reflow soldering temperature be maintained at no more than 225 during the process.44 pins are present.Through PARALLEL/SERIAL-processing, data is transmitted from this memory to the CPU.In order for a memory chip to operate, it must not be subjected to a voltage greater than 0.1mA.44 pins are set with the part.There is a memory IC in this package that works at 20MHz frequencies.In the memory, the I/O configuration has been set to COMMON.Using 3.3V on the part before use will help the part run safely and reliably in a circuit.

XC17V16VQ44I Features


Operating temperature: -40°C~85°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.
COMMON I/O equipped.

XC17V16VQ44I Applications


There are a lot of Xilinx Inc. XC17V16VQ44I applications of configuration proms for FPGAs.

  • data buffer
  • embedded logic
  • networks
  • main computer memory
  • workstations,
  • telecommunications
  • networking
  • cell phones
  • multimedia computers
  • eDRAM

Write a review

Note: HTML is not translated!
    Bad           Good