banner_page

XC18V01SO20I

Surface Mount Tube Configuration Proms for FPGAs 1 (Unlimited) In System Programmable Obsolete XC18V01


  • Manufacturer: Xilinx Inc.
  • Nocochips NO: 903-XC18V01SO20I
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 338
  • Description: Surface Mount Tube Configuration Proms for FPGAs 1 (Unlimited) In System Programmable Obsolete XC18V01 (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Surface Mount YES
Number of Pins 20
Operating Temperature -40°C~85°C
Packaging Tube
Published 1998
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code 3A001.B.1.A
Terminal Finish Tin/Lead (Sn85Pb15)
HTS Code 8542.32.00.71
Subcategory Flash Memories
Technology CMOS
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 225
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 1.27mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number XC18V01
Pin Count 20
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Programmable Type In System Programmable
Clock Frequency 33MHz
Supply Current-Max 0.025mA
Organization 128KX8
Memory Width 8
Density 1 Mb
Standby Current-Max 0.01A
Access Time (Max) 15 ns
Parallel/Serial PARALLEL/SERIAL
Memory IC Type CONFIGURATION MEMORY
Endurance 10000 Write/Erase Cycles
Data Retention Time-Min 10
Height Seated (Max) 2.65mm
Length 12.8mm
Width 7.5mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

XC18V01SO20I Overview


A neat 20-SOIC (0.295, 7.50mm Width) package is used.Packaging for external use.Qualified to operate within -40°C~85°C.With the help of In System Programmable, it can be programmed.With a voltage of 3V~3.6V, it is powered.Mounted in Surface Mount is this memory device.Try searching "XC18V01" for more parts.FPGA reuqires a supply voltage of 3.3V.Various functions can be applied to 20 terminations.This memory device can be used with a maximum voltage of 3.6V.An operating voltage of 3V is required in order to supply the device.An example of a CONFIGURATION MEMORY memory chip can be seen in the picture below.The reflow soldering process should be done at a temperature no higher than 225.FPGA is equipped wFPGAh 20 pins.PARALLEL/SERIAL-process memory transmits data.A memory chip can operate at a voltage no greater than 0.025mA.Parts come with 20 pins.I would like to mention that this is a memory IC that will be able to work at a 33MHz frequency, so I will mention that.Prior to the use of the part in a circuit, it is recommended that users apply the 3.3V to the part so that the part will run as safely and reliably as possible.The type of Flash Memories it is is specific.

XC18V01SO20I Features


Operating temperature: -40°C~85°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.

XC18V01SO20I Applications


There are a lot of Xilinx Inc. XC18V01SO20I applications of configuration proms for FPGAs.

  • telecommunications
  • Camcorders
  • nonvolatile BIOS memory
  • hard disk drive (HDD)
  • graphics card
  • multimedia computers
  • networking
  • supercomputers
  • eSRAM
  • cell phones

Write a review

Note: HTML is not translated!
    Bad           Good