XC18V01VQ44C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC18V01 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Clock Frequency | 33MHz |
| Supply Current-Max | 0.025mA |
| Organization | 128KX8 |
| Memory Width | 8 |
| Density | 1 Mb |
| Standby Current-Max | 0.01A |
| Access Time (Max) | 15 ns |
| Parallel/Serial | PARALLEL/SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Endurance | 20000 Write/Erase Cycles |
| Data Retention Time-Min | 20 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC18V01VQ44C Overview
A neat 44-TQFP package is used.External packaging for the Tray series.An individual who is qualified to operate within the 0°C~70°C domain.Through In System Programmable, it is programmable.With a voltage of 3V~3.6V, it is powered.Surface Mount is the mounting position of this memory device.Other components related to "XC18V01" can also be found by searching the word.In order for it to function, it requires a voltage supply of 3.3V.Various functions can be applied to 44 terminations.A maximum voltage of 3.6V can be applied to this memory device.It is necessary to supply the device with a minimum voltage of 3V.The memory chip in question is a CONFIGURATION MEMORY memory chip.In reflow soldering, the temperature should be controlled to a maximum of 225 degrees during the process.A 44 pin is included in it.Through PARALLEL/SERIAL-processing, data is transmitted from this memory to the CPU.In order for a memory chip to function properly, it must be subjected to a voltage of not more than 0.025mA.With the part are included 44 pins.An IC that can work at 33MHz frequency is a memory IC.To run the part safely and stably in a circuit, 3.3V recommends users apply 3.3V on the part.Memory belongs to the Flash Memories family.
XC18V01VQ44C Features
Operating temperature: 0°C~70°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.
XC18V01VQ44C Applications
There are a lot of Xilinx Inc. XC18V01VQ44C applications of configuration proms for FPGAs.
- telecommunications
- Cache memory
- networks
- mainframes
- data buffer
- personal digital assistants
- supercomputers
- embedded logic
- nonvolatile BIOS memory
- eSRAM
