XC18V01VQG44C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.32.00.51 |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC18V01 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Clock Frequency | 33MHz |
| Supply Current-Max | 0.025mA |
| Organization | 128KX8 |
| Memory Width | 8 |
| Density | 1 Mb |
| Standby Current-Max | 0.01A |
| Access Time (Max) | 15 ns |
| Parallel/Serial | PARALLEL/SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Endurance | 20000 Write/Erase Cycles |
| Data Retention Time-Min | 20 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
XC18V01VQG44C Overview
An interesting 44-TQFP package is used for this.Packaging for the external environment.A qualified individual who has the ability to operate within 0°C~70°C.Through In System Programmable, it is programmable.FPGA is powered by a voltage which is 3V~3.6V volts, and this voltage is the voltage from which the generator is powered.The memory device is mounted in the Surface Mount position.In addition to this part, you can search "XC18V01" for other similar parts.3.3V is the voltage it requires as a supply.There are different functions associated with 44 terminations.FPGA is possible to use this memory device at a maximum voltage of 3.6V.FPGA is imperative that the voltage of the device supply is at least 3V if the device is to work properly.Using the CONFIGURATION MEMORY memory chip, we can store data.Reflow soldering should be done at no higher than 260 degrees.44 pins are present.A PARALLEL/SERIAL-processing method is used to transfer data through this memory.The memory chip operates at a voltage of no more than 0.025mA.Parts come with 44 pins.I would like to mention that this is a memory IC that will be able to work at a 33MHz frequency, so I will mention that.Before using the part in a circuit, it is recommended that the user apply 3.3V before the part is used in order to ensure that it runs safely and reliably in the circuit.More specifically, it's a kind of Flash Memories.
XC18V01VQG44C Features
Operating temperature: 0°C~70°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.
XC18V01VQG44C Applications
There are a lot of Xilinx Inc. XC18V01VQG44C applications of configuration proms for FPGAs.
- cell phones
- main computer memory
- printers
- eDRAM
- hard disk drive (HDD)
- data buffer
- nonvolatile BIOS memory
- eSRAM
- supercomputers
- servers
