XC18V02PC44I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | 3A001.B.1.A |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC18V02 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Clock Frequency | 33MHz |
| Supply Current-Max | 0.025mA |
| Organization | 256KX8 |
| Memory Width | 8 |
| Density | 2 Mb |
| Standby Current-Max | 0.01A |
| Access Time (Max) | 20 ns |
| Parallel/Serial | PARALLEL/SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Endurance | 10000 Write/Erase Cycles |
| Data Retention Time-Min | 10 |
| Height Seated (Max) | 4.572mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC18V02PC44I Overview
There is a neat 44-LCC (J-Lead) package that is used in this program.Packaging for external use.-40°C~85°C-qualified.The In System Programmable programming language can be used to program it.FPGA is powered by a voltage which is 3V~3.6V volts, and this voltage is the voltage from which the generator is powered.Mounted in Surface Mount is this memory device.To find other similar parts, search for "XC18V02".The supply voltage should be 3.3V.Different functions can be assigned to 44 terminations.3.6V is the maximum voltage that can be used with this memory device.If the device needs to be supplied with power, then a minimum voltage of 3V is required.FPGA is a CONFIGURATION MEMORY memory chip that we are talking about here.FPGA is recommended that the reflow soldering temperature be maintained at no more than 225 during the process.44 pins are located on the board.This memory transmit data in the PARALLEL/SERIAL process way.The memory chip is allowed to operate from a voltage no higher than 0.025mA.There is a set of 44 pins included with the part.I would like to mention that this is a memory IC that will be able to work at a 33MHz frequency, so I will mention that.3.3V recommends that users apply 3.3V to the part before using it in a circuit so it can run safely and reliably.Memory belongs to the Flash Memories family.
XC18V02PC44I Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.
XC18V02PC44I Applications
There are a lot of Xilinx Inc. XC18V02PC44I applications of configuration proms for FPGAs.
- eSRAM
- personal computers
- nonvolatile BIOS memory
- embedded logic
- multimedia computers
- Camcorders
- networks
- personal digital assistants
- workstations,
- mainframes
