XC18V02PCG44C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC18V02 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Clock Frequency | 20MHz |
| Supply Current-Max | 0.025mA |
| Organization | 256KX8 |
| Memory Width | 8 |
| Density | 2 Mb |
| Standby Current-Max | 0.01A |
| Access Time (Max) | 20 ns |
| Parallel/Serial | PARALLEL/SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Endurance | 20000 Write/Erase Cycles |
| Data Retention Time-Min | 20 |
| Height Seated (Max) | 4.572mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
XC18V02PCG44C Overview
This package makes use of the 44-LCC (J-Lead) programming language.Packing on the outside is Tray.Qualified to perform a variety of tasks within the 0°C~70°C environment.FPGA is programmable through In System Programmable.This device is fed with a voltage of 3V~3.6V which is applied to it.This memory device is mounted in Surface Mount.Look for "XC18V02" for other related parts.FPGA reuqires a supply voltage of 3.3V.Various functions can be applied to 44 terminations.With 3.6V as the maximum voltage, the memory device can be used.An operating voltage of 3V is required in order to supply the device.Using the CONFIGURATION MEMORY memory chip, we can store data.If you're reflow soldering, you shouldn't go above 245.There are 44 pins on it.Data is transmitted in this memory using a PARALLEL/SERIAL process.The memory chip operates at a voltage of no more than 0.025mA.With the part are included 44 pins.Taking the speed of the IC into consideration, this is a memory IC that can work at a frequency of 20MHz.Before using the part in a circuit, it is recommended that the user apply 3.3V before the part is used in order to ensure that it runs safely and reliably in the circuit.Memory belongs to the Flash Memories family.
XC18V02PCG44C Features
Operating temperature: 0°C~70°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.
XC18V02PCG44C Applications
There are a lot of Xilinx Inc. XC18V02PCG44C applications of configuration proms for FPGAs.
- multimedia computers
- DVD disk buffer
- networks
- workstations,
- hard disk drive (HDD)
- personal computers
- eDRAM
- mainframes
- graphics card
- data buffer
