XC18V04PC44I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | 3A001.B.1.A |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC18V04 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Clock Frequency | 33MHz |
| Supply Current-Max | 0.025mA |
| Organization | 512KX8 |
| Memory Width | 8 |
| Density | 4 Mb |
| Standby Current-Max | 0.01A |
| Access Time (Max) | 20 ns |
| Parallel/Serial | PARALLEL/SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Endurance | 10000 Write/Erase Cycles |
| Data Retention Time-Min | 10 |
| Height Seated (Max) | 4.572mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC18V04PC44I Overview
FPGA uses a neat 44-LCC (J-Lead) package.Packaging outside of Tube.As a qualified employee, I can operate within -40°C~85°C.This device can be programmed using In System Programmable.With a voltage of 3V~3.6V, it is powered.Surface Mount is the orientation of this memory device.For other related parts, search "XC18V04".The supply voltage is 3.3V.Different functions are associated with 44 terminations.A maximum voltage of 3.6V can be applied to this memory device.To supply the device, a minimum voltage of 3V is a must.An CONFIGURATION MEMORY memory chip.Reflow soldering should be done at 225°C maximum.Pins on it are 44-shaped.A PARALLEL/SERIAL-processing method is used to transfer data through this memory.In order for a memory chip to operate, it must not be subjected to a voltage greater than 0.025mA.Parts include 44 pins.In terms of speed, this is a memory IC that operates at a 33MHz frequency.3.3V recommends that users apply 3.3V to the part before using it in a circuit so it can run safely and reliably.Specifically, It is a kind of Flash Memories.
XC18V04PC44I Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.
XC18V04PC44I Applications
There are a lot of Xilinx Inc. XC18V04PC44I applications of configuration proms for FPGAs.
- cell phones
- eDRAM
- Cache memory
- networks
- servers
- main computer memory
- nonvolatile BIOS memory
- mainframes
- eSRAM
- personal computers
