XC18V04VQ44C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.32.00.51 |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC18V04 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Clock Frequency | 20MHz |
| Supply Current-Max | 0.025mA |
| Organization | 512KX8 |
| Memory Width | 8 |
| Density | 4 Mb |
| Standby Current-Max | 0.01A |
| Access Time (Max) | 20 ns |
| Parallel/Serial | PARALLEL/SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Endurance | 20000 Write/Erase Cycles |
| Data Retention Time-Min | 20 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC18V04VQ44C Overview
44-TQFP is used in this package.Packaging for Tray.An individual who is qualified to operate within the 0°C~70°C domain.Using the In System Programmable axis, it can be programmed to do whatever you want.A voltage of 3V~3.6V is applied to it in order to power it.Surface Mount is the mounting position of this memory device.Search "XC18V04" for related parts.The supply voltage is 3.3V.Different functions are associated with 44 terminations.There is a maximum voltage of 3.6V that can be applied to this memory device.It is necessary to supply the device with a minimum voltage of 3V.The memory chip in this picture is called a CONFIGURATION MEMORY memory chip.In reflow soldering, the temperature should be controlled to a maximum of 225 degrees during the process.FPGA has pins on the 44 axis.A PARALLEL/SERIAL-processing method is used to transfer data through this memory.In order for a memory chip to operate, it must not be subjected to a voltage greater than 0.025mA.There is a set of 44 pins that are included with the part.FPGA is a 20MHz-frequency memory IC.Before using the part in a circuit, it is recommended that the user apply 3.3V before the part is used in order to ensure that it runs safely and reliably in the circuit.Specifically, It is a kind of Flash Memories.
XC18V04VQ44C Features
Operating temperature: 0°C~70°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.
XC18V04VQ44C Applications
There are a lot of Xilinx Inc. XC18V04VQ44C applications of configuration proms for FPGAs.
- workstations,
- networking
- hard disk drive (HDD)
- embedded logic
- main computer memory
- multimedia computers
- Camcorders
- eDRAM
- printers
- eSRAM
