XC18V512PC20C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC18V512 |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Clock Frequency | 33MHz |
| Supply Current-Max | 0.025mA |
| Organization | 64KX8 |
| Memory Width | 8 |
| Density | 512 kb |
| Standby Current-Max | 0.01A |
| Access Time (Max) | 15 ns |
| Parallel/Serial | PARALLEL/SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Data Retention Time-Min | 20 |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC18V512PC20C Overview
FPGA uses a nice 20-LCC (J-Lead) package that makes FPGA easy to use.The external packaging of Tube is made of Tube plastic.An individual who is qualified to operate within the 0°C~70°C domain.This device can be programmed using In System Programmable.FPGA is powered by a voltage which is 3V~3.6V volts, and this voltage is the voltage from which the generator is powered.This memory device is mounted in Surface Mount.To find other similar parts, search for "XC18V512".3.3V is the required supply voltage.FPGA is possible to connect different functions on the 20 axis at different terminations.3.6V is the maximum voltage that can be used with this memory device.An operating voltage of 3V is required in order to supply the device.An CONFIGURATION MEMORY memory chip.If reflow soldering is being performed, the temperature should not be higher than 225 when soldering should be reflowed.20 pins are present.Data is transmitted in this memory using a PARALLEL/SERIAL process.For the memory chip to operate, it requires a voltage not exceeding 0.025mA.There is a set of 20 pins that are included with the part.Speaking of speed, this is a memory IC that can work at a 33MHz frequency.The 3.3V company recommends that users apply 3.3V to a part before using it so the part will be able to run safely and reliably in a circuit.The type of Flash Memories it is is specific.
XC18V512PC20C Features
Operating temperature: 0°C~70°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.
XC18V512PC20C Applications
There are a lot of Xilinx Inc. XC18V512PC20C applications of configuration proms for FPGAs.
- DVD disk buffer
- mainframes
- cell phones
- data buffer
- main computer memory
- nonvolatile BIOS memory
- networking
- servers
- eDRAM
- telecommunications
