banner_page

XC18V512PC20I

Surface Mount Tube Configuration Proms for FPGAs 3 (168 Hours) In System Programmable Obsolete XC18V512


  • Manufacturer: Xilinx Inc.
  • Nocochips NO: 903-XC18V512PC20I
  • Package: 20-LCC (J-Lead)
  • Datasheet: PDF
  • Stock: 881
  • Description: Surface Mount Tube Configuration Proms for FPGAs 3 (168 Hours) In System Programmable Obsolete XC18V512 (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 20-LCC (J-Lead)
Surface Mount YES
Number of Pins 20
Operating Temperature -40°C~85°C
Packaging Tube
Published 1999
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 20
ECCN Code 3A991.B.1.A
Terminal Finish Tin/Lead (Sn85Pb15)
HTS Code 8542.39.00.01
Subcategory Flash Memories
Technology CMOS
Voltage - Supply 3V~3.6V
Terminal Position QUAD
Terminal Form J BEND
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 1.27mm
Base Part Number XC18V512
Pin Count 20
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Programmable Type In System Programmable
Clock Frequency 33MHz
Supply Current-Max 0.025mA
Organization 64KX8
Memory Width 8
Density 512 kb
Standby Current-Max 0.01A
Access Time (Max) 15 ns
Parallel/Serial PARALLEL/SERIAL
Memory IC Type CONFIGURATION MEMORY
Endurance 10000 Write/Erase Cycles
Data Retention Time-Min 10
Height Seated (Max) 4.572mm
Length 8.9662mm
Width 8.9662mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

XC18V512PC20I Overview


This package is based on a neat 20-LCC (J-Lead) package which is used by it.Packaging for the external environment.As a qualified employee, I can operate within -40°C~85°C.With the help of In System Programmable, it can be programmed.The voltage fed to it is 3V~3.6V.Mounted in Surface Mount is this memory device.XC18V512 will give you other related parts.FPGA reuqires a supply voltage of 3.3V.Different functions can be assigned to 20 terminations.In order to use this memory device, a maximum voltage of 3.6V should be used.If the device needs to be supplied with power, then a minimum voltage of 3V is required.The memory chip in question is a CONFIGURATION MEMORY memory chip.FPGA has pins on the 20 axis.As a result of the PARALLEL/SERIAL process, data is transmitted from this memory.In order for a memory chip to operate, it must not be subjected to a voltage greater than 0.025mA.Parts come with 20 pins.Using a 33MHz frequency, this memory IC can work at high speeds.In order for the part to function safely and reliably as part of a circuit, 3.3V recommends that users apply 3.3V to the part prior to use in order to ensure that it will work properly.In specific, it can be described as a form of Flash Memories.

XC18V512PC20I Features


Operating temperature: -40°C~85°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.

XC18V512PC20I Applications


There are a lot of Xilinx Inc. XC18V512PC20I applications of configuration proms for FPGAs.

  • networks
  • telecommunications
  • main computer memory
  • Camcorders
  • eDRAM
  • data buffer
  • eSRAM
  • personal computers
  • multimedia computers
  • graphics card

Write a review

Note: HTML is not translated!
    Bad           Good