XC18V512VQ44C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC18V512 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Clock Frequency | 33MHz |
| Supply Current-Max | 0.025mA |
| Organization | 64KX8 |
| Memory Width | 8 |
| Density | 512 kb |
| Standby Current-Max | 0.01A |
| Access Time (Max) | 15 ns |
| Parallel/Serial | PARALLEL/SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Endurance | 20000 Write/Erase Cycles |
| Data Retention Time-Min | 20 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC18V512VQ44C Overview
A neat 44-TQFP package is used.Tray external packaging.0°C~70°C-qualified.The In System Programmable programming language can be used to program it.The voltage fed to it is 3V~3.6V.There is a memory device mounted in Surface Mount.For other related parts, search "XC18V512".There is a requirement that it is supplied with a voltage of 3.3V.With different functions, 44 terminations can be used.As long as the maximum voltage of the memory device is 3.6V, then the memory device can be used.3V is the minimum voltage required to supply the device.An CONFIGURATION MEMORY memory chip.In reflow soldering, the temperature should be controlled to a maximum of 225 degrees during the process.FPGA has 44 pins.Data is transmitted in this memory using a PARALLEL/SERIAL process.The memory chip is allowed to operate at a voltage that is no greater than 0.025mA.The part comes with a set of 44 pins.FPGA is a 33MHz-frequency memory IC.Using 3.3V on the part before use will help the part run safely and reliably in a circuit.In specific, it can be described as a form of Flash Memories.
XC18V512VQ44C Features
Operating temperature: 0°C~70°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.
XC18V512VQ44C Applications
There are a lot of Xilinx Inc. XC18V512VQ44C applications of configuration proms for FPGAs.
- Camcorders
- eSRAM
- personal digital assistants
- networks
- personal computers
- printers
- embedded logic
- multimedia computers
- telecommunications
- data buffer
